Tesla Screen Rotation Mount – Grundig Tilt & Swivel Center Display Bracket for Model 3 & Model Y
Impossible de charger la disponibilité de la réception
Spécification
- Unité de gestion de stock Screen Swivel Mount-2016-2023 Model 3
Besoin d’aide ?
Si vous avez besoin d’aide, n’hésitez pas à nous contacter à l’adresse suivante :
service@grundig-auto.com
I. Product Overview
Your Tesla center display leaves the factory fixed at a single angle. Most of the time that's fine — until a low sun hits the glass, or you're trying to read a map without leaning over the wheel. The Grundig Screen Rotation Mount lets you aim the screen instead of adjusting yourself around it.
What it replaces is the factory screen bracket, and nothing else. The display keeps every function it had, and the interior goes back to stock whenever the bracket comes off.
II. Key Features
Four-Way Adjustment. Tilt the display up or down by 15°, turn it left or right by 30° — four directions of movement, so you can aim it away from a reflection rather than leaning across the wheel to read it.
Aluminum Alloy, Matte Finish. An aluminum alloy and ABS body stays rigid over broken pavement, and the matte baked-enamel coating resists scuffs and fingerprints.
Molded to Factory Geometry. The bracket is modeled on 3D-scanned data from the actual vehicle, so it follows the dash contours and reads as part of the interior rather than an add-on.
Nothing Altered, Nothing Cut. Installation takes about 20-30 minutes at the existing factory mounting points — no drilling, no modifications, and fully reversible.
III. Compatibility
| Variant | Model year |
| Model 3 | 2017-2023 |
| Model Y | 2020-2023 |
| Model 3 Highland | 2024+ |
| Model Y Juniper | 2025+ |
Confirm your model and model year before ordering. If your vehicle isn't listed above, contact us before purchase.
IV. Specifications
| Brand | Grundig |
| Product | Center Screen Rotation & Tilt Mount |
| Adjustment | 30° left/right rotation, 15° up/down tilt |
| Material | Aluminum alloy & ABS |
| Finish | Matte baked enamel |
| Compatibility | See Section III — four variants, not interchangeable |
| Drive Side | Left-hand drive (LHD) |
| Installation | Approx. 20-30 minutes · reversible |
V. Important Notes
- Select the variant that matches your model and model year — each generation uses a different screen bracket, and they are not interchangeable.
- Tilt and swivel are limited by mechanical stops — never force the display past them.
- Tighten every fastener during installation, then re-check them after the first week of driving.
- This is a viewing-angle accessory, not a substitute for safe driving — keep your eyes on the road and follow local traffic laws.
- Stop using the mount and contact customer support if the screen feels loose or drifts out of position.
- The installation video will be sent to the email address used for your order.
