Tesla Screen Swivel Mount – Grundig Tilt & Swivel Center Display Bracket for Model 3 & Model Y
Couldn't load pickup availability
Need Help?
If you need any help, please don't hesitate to contact us at
service@grundig-auto.com
I. Product Overview
Aim your Tesla's center screen instead of leaning to see it. The Grundig Screen Swivel Mount replaces the fixed bracket behind the display with one you can swivel 30° left and 30° right and tilt 15° up and 15° down — so you can angle the screen away from glare instead of leaning over to read it.
It replaces only the factory screen bracket — every other part of your car stays untouched. The display keeps every function it had, and the interior returns to stock when you remove the mount.
II. Key Features
Dual-Axis Adjustment. 30° of swivel to the left and 30° to the right, plus 15° of tilt up and 15° down, with built-in stops. Set the screen where the glare isn't and leave it there.
Holds Its Position. Built to hold the display where you set it — no drifting, no rattle.
Matte Aluminum Body. An aluminum alloy body with an ABS trim piece, finished in matte to resist scuffs and fingerprints.
Machined to Factory Geometry. Modeled on 3D-scanned data from the actual vehicle, so it matches the dash contours and looks like a factory part, not an add-on.
Reversible Install. About 30 minutes at the existing factory mounting points — no drilling, no cutting. Keep the original bracket and your interior goes back to stock.
III. Compatibility
| Vehicle | Model year |
| Model 3 | 2016–2023 |
| Model Y | 2021–2024 |
| Model 3 Highland (2024+) | 2024 and newer |
| Model Y Juniper (2025+) | 2025 and newer |
Please select the version that matches your model and model year — the four versions are not interchangeable. If your vehicle isn't listed above, contact us before purchase.
IV. Specifications
| Brand | Grundig |
| Product | Center Screen Swivel Mount |
| Adjustment | Swivel: 30° left and 30° right. Tilt: 15° up and 15° down. |
| Material | Aluminum alloy body, ABS trim piece |
| Finish | Matte |
| Compatibility | Four versions — see Section III. The versions are not interchangeable. |
| Installation | About 30 minutes · no wiring, no drilling |
| Reversible | Yes — the factory bracket can be reinstalled |
V. Installation
1. Park and power down. Leave the screen in its normal position and turn the vehicle off.
2. Swap the factory bracket for the mount. No wiring is touched and nothing is cut.
3. Set the tension and mount the display. Check the swivel and tilt stops before you put the trim back in place.
The installation video is sent to the email address used for your order.
VI. Frequently Asked Questions
Will it fit my 2025 Model Y (Juniper) or my 2024 Model 3 (Highland)?
Only with the matching version. The 2024+ Model 3 (Highland) and 2025+ Model Y (Juniper) use a different screen bracket, so the four versions are not interchangeable — choose your model and model year above.
Does it void my Tesla warranty?
The mount installs without drilling, without cutting, and without touching your vehicle's wiring or high-voltage system, so it doesn't affect your Tesla warranty. Keep the factory bracket so the car can go back to stock.
Will the screen sag or rattle over time?
The mount holds the display where you set it, without drifting or rattling. Re-check the fasteners after your first week of driving, and if the screen ever feels loose, stop using the mount and contact customer support.
Does the screen block the vents, the gear indicator, or my view of the road?
No. The display stays where the factory screen sits — it doesn't cover the air vents, the PRND indicator, or the driver's view.
Do I have to cut, drill, or disconnect anything?
No. The mount reuses the existing factory mounting points and no wiring is touched. It comes off in a few minutes.
How long does installation take?
About 30 minutes with basic hand tools. Firmware, settings and screen functions are untouched — you're only swapping the bracket behind the display.
Can I put the factory bracket back on?
Yes. The factory bracket is untouched — reinstall it and the dash returns to stock.
VII. Important Notes
- Select the variant that matches your model and model year — each generation uses a different screen bracket, and the four versions are not interchangeable.
- Tilt and swivel have built-in limits — never force the display past them.
- Tighten every fastener during installation, then re-check them after the first week of driving.
- Adjust the screen only while the vehicle is parked.
- Stop using the mount and contact customer support if the screen feels loose or drifts out of position.
